View PLA160_435905.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PLA160
Single Pole OptoMOS(R) Relay
Load Voltage Load Current Max RON
PLA160 300 50 100
Units V mA
Description PLA160 is a 300V, 50mA, 100 1-Form-A relay. This performance leader features the fastest switching speed (50us) available in an OptoMOS relay.
Features * Small 6 Pin SOP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 1500VRMS Input/Output Isolation * FCC Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Tape & Reel Version Available
Approvals * UL/C-UL Recognized Component File #: E76270 * BSI Certified - Certificate #: 8416
Ordering Information Applications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security Systems * Aerospace * Industrial Controls * Reed Relay Replacement Part # PLA160 PLA160S PLA160STR Description 6 Pin DIP (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel)
Pin Configuration
PLA160 Pinout
AC/DC Configuration 1 2 3 6 5 4
PLA160 Pinout
DC Only Configuration 1 2 3 6 5 4
+ Control - Control Do Not Use
Load Do Not Use Load
+ Control - Control Do Not Use
+ Load - Load
Switching Characteristics of Normally Open (Form A) Devices
10ms CONTROL
+ 90% LOAD 10% + TON 10%+ TOFF
DS-PLA160-R3
www.clare.com
1
PLA160
Absolute Maximum Ratings (@ 25 C)
Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.)
1 2
Min 3750 -40 -40 -
Typ Max Units 1501 50 1 5 8002 +85 +125 +260 +220 mW mA A V mW VRMS C C C C
Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability.
Derate Linearly 1.33 mw/C Derate Linearly 6.67 mw/C
Electrical Characteristics
Parameter Output Characteristics @ 25C Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Capacitance Input to Output Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Common Characteristics @ 25C Input to Output Capacitance Input to Output Isolation CI/O VI/O 3750 3 pF VRMS IL=50mA IF=10mA VR=5V IF IF VF VR IR 10 0.4 1.8 0.7 2.4 50 2.8 5 10 mA mA V V A 10ms IL=50mA IL=80mA VL=300V VL=100V IF=10mA, VL=10V IF=10mA, VL=10V 50V; f=1MHz VL IL IL ILPK RON ILEAK ILEAK TON TOFF COUT 60 15 1 25 25 3 3 300 50 80 200 100 30 25 10 50 50 V mA mA mA nA nA S S pF pF Conditions Symbol Min Typ Max Units
2
www.clare.com
Rev. 3
PLA160
PERFORMANCE DATA*
PLA160 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C)
35 30 Device Count (N) Device Count (N) 25 20 15 10 5 0 2.34 2.38 2.42 2.46 2.50 LED Forward Voltage Drop (V)
35 30 25 20 15 10
PLA160 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 50mADC; IF = 10mADC)
PLA160 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C)
18 16 Device Count (N) 14 12 10 8 6 4 2 0
5 0 60 61 62 63 64 65 On-Resistance ()
335
340
345
350
355
360
365
Blocking Voltage (V)
PLA160 Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 50mADC)
30 25 Device Count (N) Device Count (N) 20 15 10 5 0 0.9 1.1 1.3 1.5 1.7 1.9 LED Current (mA) 30 25
PLA160 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) (Load Current = 50mADC )
30 25 Device Count (N) 0.9 1.1 1.3 1.5 1.7 1.9 20 15 10
PLA160 Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 50mADC; IF = 10mADC)
20 15 10 5 0 LED Current (mA)
5 0 0.025 0.030 0.035 0.040 0.045 0.050 Turn-On (ms)
30 25 Device Count (N) 20 15 10
PLA160 Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 50mADC; IF = 10mADC)
PLA160 Typical Load Current vs. Temperature
80 70 Load Current (mA) Leakage (A) 60 50 40 30 20 10 0 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 -40 -20 0 20 40 60 80 100 120 -40
PLA160 Typical Leakage vs. Temperature (Measured across Pins 4 & 6)
20mA 10mA 5mA
5 0 0.015 0.020 0.025 0.030 0.035 0.040 Turn-Off (ms)
-20
0
20
40
60
80
100
Temperature (C)
Temperature (C)
PLA160 Typical Blocking Voltage vs. Temperature
380 Blocking Voltage (VRMS) 375 370 365 360 355 350 345 340 335 -40 -20 0 20 40 60 80 100 Temperature (C) Turn-On (ms) 0.12 0.10 0.08 0.06 0.04 0.02 0 -40
PLA160 Typical Turn-On vs. Temperature (Load Current = 50mADC)
0.14 0.12 Turn-Off (ms) 0.10 0.08 0.06 0.04 0.02
PLA160 Typical Turn-Off vs. Temperature (Load Current = 50mADC)
10mA 20mA
10mA 0 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Temperature (C) Temperature (C)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department.
Rev. 3
www.clare.com
3
PLA160
PERFORMANCE DATA*
PLA160 Typical LED Forward Voltage Drop vs. Temperature
LED Forward Voltage Drop (V) 3.6 3.2
Turn-On (ms)
PLA160 Typical Turn-On vs. LED Forward Current (Load Current = 50mADC)
0.045 0.040
PLA160 Typical Turn-Off vs.LED Forward Current (Load Current = 50mADC)
0.032 0.031
2.8 2.4 2.0 1.6 -40 -20 0 20 40 60 80 100 120 Temperature (C)
0.030 0.025 0.020 0.015 0.010 0.005 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA)
Turn-Off (ms)
0.035
0.030 0.029 0.028 0.027 0.026 0.025 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA)
50mA 30mA 20mA 10mA 5mA
80 70
On-Resistance ()
PLA160 Typical On-Resistance vs. Temperature (Load Current = 50mADC; IF = 10mADC)
PLA160 Typical IF for Switch Operation vs. Temperature (Load Current = 50mADC)
6 5
LED Current (mA)
PLA160 Typical IF for Switch Dropout vs. Temperature (Load Current = 50mA)
6 5 LED Current (mA) 4 3 2 1
60 50 40 30 20 10 -40 -20 0 20 40 60 80 100 Temperature (C)
4 3 2 1 0 -40 -20 0 20 40 60 80 100 Temperature (C)
0 -40 -20 0 20 40 60 80 100 Temperature (C)
50 40 30 20 10 0 -10 -20 -30 -40 -50
PLA160 Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 10mADC
PLA160 Energy Rating Curve
0.45 0.40 Load Current (A) 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 10s 100s 1ms 10ms 100ms Time
Load Current (mA)
-3
-2
-1
0
1
2
3
1s
10s 100s
Load Voltage (V)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department.
4
www.clare.com
Rev. 3
PLA160
Mechanical Dimensions
6 Pin DIP Surface Mount ("S" Suffix)
7.620 .254 (.300 .010) 4.445 .127 (.175 .005) 3.302 (.130) .635 TYP. (.025) .254 TYP. (.010) 6.350 .127 (.250 .005)
8.382 .635 (.330 .025) 2.540 .127 (.100 .005)
PC Board Pattern (Top View) 2.540 .127
(.100 .005)
9.525 .254 (.375 .010) 1.905 .127 (.075 .005)
8.305 .127 (.327 .005)
.457 .076 (.018 .003)
1.499 .127 (.059 .005)
6 Pin DIP Through Hole (Standard)
7.620 .254 (.300 .010) 3.302 (.130) 6.350 .127 (.250 .005) 9.144 .508 (.360 .020)
8.382 .635 (.330 .025) 2.540 .127 (.100 .005)
PC Board Pattern (Top View)
6-.800 DIA. (6-.031 DIA.) 9.144 (.360) 6.350 .127 (.250 .005)
2.540 .127 (.100 .005) 7.620 .127 (.300 .005)
7.239 TYP. (.285)
.457 .076 (.018 .003)
5.080 .127 (.200 .005)
Tape and Reel Packaging for 6 Pin Surface Mount Package
330.2 DIA. (13.00) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004)
Top Cover Tape Thickness .102 MAX. (.004)
6.731 MAX. 1.753 .102 (.265) (.069 .004) .406 MAX. (.016) 7.493 .102 (.295 .004) 12.090 (.476) 4.877 (.192)
1
6
16.002 .305 (.630 .012) 10.100 (.398)
Embossed Carrier
Top Cover Tape
.050R TYP.
11.989 .102 (.472 .004) User Direction of Feed
10.100 .102 (.398 .004)
1.549 .102 (.061 .004)
Embossment
Dimensions mm (inches)
Rev. 3
www.clare.com
5
Worldwide Sales Offices
CLARE LOCATIONS
Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628
EUROPE
European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spanga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797
ASIA PACIFIC
Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
SALES OFFICES AMERICAS
Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824
http://www.clare.com
Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person.
Specification: DS-PLA160-R3 (c)Copyright 2000, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 2/22/01

▲Up To Search▲

Price & Availability of PLA160

	To Download PLA160 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .